1 / 3
60W Electronic Load Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Based off HAMMER_T's design, I had to make some more room for my banana plugs as they are bigger. I tried to incorporate it into his design, but got lazy, so I went with this simplified version. I also wanted to use less screws to assemble. This one will need 6 M3's total, you can use 2 original ones from the unit, then you will need four M3x25MM.
Category: Electronics