SANDSHULT Sandshult filament rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament shelf using IKEA SANDSHULT
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Parts for assembling the holder using IKEA SANDSHULT bracket.
The holder has a front and a rear part for attaching a 25mm diameter rod (broom handle). The models include left and right sides, and possibly a centre pass-through part.
The holder is prepared so that it is drilled to the wall with the shorter side so that the filaments do not touch the wall.
From the bottom it is secured with an M6x16 screw (tighten only slightly). To secure the rear bar, a longer screw is used from the bottom through the cover that is in the files.
Layer height: 0.3mm
Supports: yes - forced on rear parts
Material: Prusament PETG