1 / 1
Movement stabilizer for DREMEL drill press
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds two smooth rods to the press to ensure linear movement
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 53
- Makes
- 0
- Views
- 606
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Additional parts:
2x 120mm (roughly) 8mm smooth rods
2x LM8UU bearings
3x M5 x 30mm screws
3x M5 nuts
Manual:
Press fit bearings into drill_guide-Press_Main.stl and slide onto rods before placing the prints on the press itself.
Slide drill_guide-Base_Bottom.stl all the way down, add the rods (might require pressing them into holes with some force) the cover it with drill_guide-Base_Top.stl. Ensure that the guide moves smoothly before tightening the parts to pipes.