Housing for DDCS V4.1 CNC Controller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is just a basic housing for the CNC controller. I put a hole in the top of it to mount it. Dimensions are given.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 87
- Makes
- 0
- Views
- 327
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
The DDCS V4.1 comes with four holes in side to mount it into the panel. I just needed a box to hang off the side of my mill while putting the rest of electronics under the mill. There is a drawing provided if you need to modify it.
Parts Needed
Qty 4 Heat-Set Inserts for Plastic, Brass, M4 x 0.7 mm, 6.4 mm McMaster 94459A160
Qty 2 Shoulder Bolt or Pan Head M2.5x.45mm Length 10mm For USB on side of box
Qty 4 Sholder Bolt or Pan Head M4x.07 Length ~15mm
¼-20 Threaded rod and nuts to create post to mount