French Cleat Shelf
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small 6 inch square platform shelf for a French Cleat wall system. Cleat is 0.5" by 0.5". 4" wall cleat heights.
- Rating
- 5 / 5
- Likes
- 113
- Downloads
- 430
- Makes
- 1
- Views
- 3,362
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
French Cleat mountable shelf. Simple, 6" square shelf surface with a 0.5" by 0.5" cleat. This French Cleat system utilizes 4" wall cleats resulting in 4" support legs on this shelf.
Print with shelf top facing down as this gives a nice smooth shelf surface (or textured if you've go that plate!) and allows for printing with no supports.
Picture/Model is setup for 0.6 nozzle and 0.4mm layer heights.
V2 (if I make one) will remove 1/16" from the cleat tip to allow for a tiny bit of extra clearance in the cleat system in case dust/crumbs/etc have settled into the cleat.