1 / 4
Wide Sunlu S2 Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Longer & wider Sunlu S2 stand for maximum stability
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 207
- Makes
- 4
- Views
- 670
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stelzer's Sunlu S2 Filamentdryer bigbase has improved stability one direction of the spool dryer, but is unstable in the other direction. It will tip over when opening the lid due to the narrower footprint of the new stand vs the original.
My design remix increases the footprint wider than the original dryer feet and improves stability when opening the lid to change spools. The shape is optimized to better support the dryer case geometry as well as minimize print time.
Printing
Printed in FlashForge Galaxy Black PLA at
- 0.3mm layer
- 4 perimeters
- 10% gyroid infill
- support required (see 3mf for reference)
Thanks and let me know if you have any questions.