1 / 7
Santa LED Lightbox
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Santa lightbox that has a built-in stand.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 30
- Makes
- 1
- Views
- 162
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
Santa!!
I've included pictures to help with assembly.
I printed this with my MK4 with MMU3.
Supplies/Tools needed:
Assembly instructions:
- Print the back. There is a negative volume in the 3mf that will be used to pass the LED lights through.
- Cover the inside of the back with foil tape. Use the exacto knife to cut a clean edge in the corners.
- Feed the LED lights through the hole and attach to the sides of the back. Cut off any excess LEDs or use them all that is your choice.
- Print the front.
I use these settings to obtain a clean first layer with no gaps.
- First Layer extrusion width - .6mm
- Overlap - Infill/Perimeters overlap 70%
- Slicing - Elephant foot compensation 0mm
Attach the front to the back and enjoy!