Futaba TM-18 Module Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a holder and mounting for the TM-18 module for the 32MZ.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 61
- Makes
- 0
- Views
- 170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a holder and mounting for the TM-18 module for the 32MZ.
You will need 2mm or 2.5mm heat press inserts that go into the mount that is taped to the 3MZ. Double side tape both the TM-18 mount parts to the TX and to the TM-18 module.
For the antenna you set the antenna on the module, then slip over the support and align the 12 point socket onto the nut. Carefully unthread the entire assembly as one, then slip over the sleeve to support the antenna when mounted. You can then thread on and off the antenna into the same position each time while keeping it well supported from any external force.