Cherry MX Keycap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed keycaps for Cherry MX switches. Hope it helps.
There are more versions. One is with a flat place for a sticker, the other ones top is more ergonomic and one has nicer edges.
Print settings:
Layer height: 0.1mm
Printing speed: 20 mm/s
Printing speed initial layer: 5 mm/s
Be careful with orientation - before putting on the switch, check out the cross, two opposite sides are thinner, place them to the narrower side of the switch.
To print the stickers I used Cannon SELPHY CP1300, paper KC-18IS
If you need more variants or some adjustments, just let me know. I can easily adjust cross hole size, individual edge angles, length, etc.
I used Ender V2. Please if you use resin, let me know how the print looks.
Category: Computer