Bookmark - Veteran Salute HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Patriotic Salute to our Veterans. In remembrance of Veterans Day. Pride for those who served and made sacrifices.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 14
- Makes
- 1
- Views
- 47
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.
Veterans Day is coming. My Wife wants to make a tribute to those who served. She is more observant of this day, unlike some of us(including myself) who takes this day for granted. My brother-in-laws were service members and one has been affected physically for his service…the oft-forgotten price some veterans pay for our freedom. This is a Thank You and Salute to those two and all who served.
Pictures shown are printed in an 0.4mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Can be printed in 5 or 4 Colors. The one pictured added one layer of a blue-gray to give it a little more dimension. Truthfully, it doesn't make much of a difference. I just like the little touches. My pet peeve.
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.4
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions: 5 Colors
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #10 (0.88mm) swap to Blue Gray
At layer #11 (0.96mm) swap to Red
At layer #13 (1.12mm) swap to Jade White for the rest.
Swap Instructions: 4 Colors
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #11 (0.96mm) swap to Red
At layer #13 (1.12mm) swap to Jade White for the rest.
This is a five color HueForge. Use this tutorial by Cloudy Nostalgia to print more than 4 colors on 1 AMS.
Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.
More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames
They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections
