1 / 4
ZimaBlade dual SSD-Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for 2 2,5" drive, for example SSD with ZimaBlade pressfit on top.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 63
- Makes
- 1
- Views
- 614
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Notes on printing:
Orientation so that the flat side (inside) lies on the print bed. Optional possibility to glue in TPU feet. Minimal support required.
Assembly:
Screw the printed parts to the two hard disks using 8x M3x8 screws. Then simply insert the ZimaBlade into the recess at the top. When I print, the ZimaBlade “snaps” into the print.
PS:
I haven't printed or used the feet yet, so I can't say anything about the accuracy of fit.