1 / 4
GRAVITRAX; Cantilever
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
GRAVITRAX Cantilever, hang those stones on the outside of your support columns
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 150
- Makes
- 0
- Views
- 1,785
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Public Domain
GRAVITRAX; Cantilever
GRAVITRAX Cantilever, hang those stones on the outside of your support columns
Print includes two parts: Cantilever and Footplate; Footplate clicks in the bottom of the stone.
Tested, fitted and used with my own Gravitrax set (note: it’s a bit of balancing act but it functioned as intended)
More to come, if you like it and you are rich enough then Paypal Me, else just enjoy!
G-code details:
- Printer: Prusa MK3/S/S+
- Material: PLA (1.75mm); 11 gr.; 3.90 m
- Print settings:
- Nozzle 0.4 mm
- Extruder 210 C°
- Heated bed 60 C°
- Layer 0.15 mm
- Infill: Grid 15%
- Adhesion: Skirt
- Print time (est.): 1 hr. 24 min.
- Software: Cura v.4.12.0
- Stl file: exported from dwg