Horizontal Brush Stand (holder)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.06 – €1.29 net (excluding VAT)
For file: Horizontal_Brush_Stand_v2.0_(model_A)_0.25mm_PLA_MINI_1h6m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.17 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 1.11 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a Horizontal Brush Stand that can hold 1 brush (or pen). There are multiple designs included.
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 147
- Makes
- 3
- Views
- 626
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Multiple designs:
There are multiple designs included.
Recommended print settings:
- Size: 5x5x3 cm (smallest model), 5x5x5 cm (largest model), the models are resizable
- Filament: PLA
- Layer height: 0.25 mm
- Infill: 20%
- Nozzle: 0.4 mm
- Supports: None
- Brim/Raft: It is recommended to print this model with a brim or raft to reduce warping and improve bed adhesion. If adding a brim doesn't improve the bed adhesion enough, try adding a raft.
This model is printed using the filament “Prusament PLA Galaxy Black”.
(OPTIONAL) Raft Settings in PrusaSlicer v2.4.0:
- Click on the Print Settings tab (top left)
- Click on the Expert tab (top right)
- Click on the Support Material menu
- Enter "Raft layers" value "2"
- Enter "Raft contact Z distance" value "0.1 mm" (default)
- Enter "Raft expansion" value "1.5 mm" (default)