Christmas Ornament Hanger | 1.5 second print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
nopp, that is not a typo!
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 53
- Makes
- 0
- Views
- 548
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution
With all the amazing Christmas ornaments coming online, I needed some hooks to hang them on my tree.
Therefore I programmed an online tool that generates Gcode to print an ornament hanger in 1.5Sec! Yes, really.
I have made the tool work from a browser, and it can generate for marlin-based machines and Klipper-based machines!
See it in action here;
Link to the code generator;
1,5sec-ornament-hanger – Voxel3D
Pre-generated codes;
I have added 40+ pre-sliced gcodes to this page, but keep in mind these are conservative to be as universal as possible. Using the tool above will always be more specific and efficient.
Strength;
The hooks are made by extruding a very thick line of 1mm high and 1,2mm wide. From my testing, they are well strong enough for the simple and light, hollow ornaments. However I do see the concern of hanging expensive Christmas ornaments to these printed hooks, therefore I would advise;
- Print them in PLA, or in a stiff material such as carbon-filled ones. (bonus, the matte texture blends in pretty well with the tree)
notes;
- The 1.5 seconds (video above) was achieved with an Ultra-high-flow hotend. (rapido UHF)
- I cannot upload Klipper-specific gcodes on printables. For printers running Klipper, please use the tool online.
- Featured image credit to @Allpa