1 / 8
Tiny Penguin and Snowman
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print-in-place articulated Tiny Penguin and Snowman! Keychain versions included 🔗
- Rating
- 0 / 5
- Likes
- 27
- Makes
- 0
- Views
- 432
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Standard Digital File License
Print-in-place articulated Tiny Penguin and Snowman!
Keychain versions included!
Considerations:
- They are small and articulated. That means good bed adhesion is required. For tricky filaments that usually have worse adhesion I recommend using some kind of glue (my personal favourite is 3DLac spray).
- The "Standard" version is the original one. If you find adhesion issues with the head getting loose mid-print, then try the "Stabilized" alternative. Those have tiny built-in supports on the neck that help keeping everything together, and can be released by rotating the head after print.
- Inside each folder you will find a 3MF file and an STL folder. I've included all the 4 versions on the same 3MF file, which makes it tidier. Just delete/deactivate the ones you don't want to print 😉
- The Tiny Penguin has a small built-in brim for the wings. Easy to remove after printing. It has a couple of support dots in the armpits as well to help stabilize the wings during printing. It may feel a bit hard to open the wings on the first try, but should be loose after that.
- For the Tiny Snowman, I recommend printing them with 3 perimeters, or a solid threshold that makes the arms solid. Especially if you plan to use it as a keychain.
- To change colors easily, check my quick tutorial.