Double Eagle M4/AR15 Stand with embedded Logo.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DE Airsoft M4 stand using the existing Hi-cap mag.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 50
- Makes
- 0
- Views
- 1,014
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Hi,
here's a stand for an Airsoft replica from Double Eagle, My model is M923G in this case.
Stand uses the standard hi-cap mag with an adapter.
The idea was to make it simple and flat so can be easily transported to the site.
Simple print, mine is 0.3 layer with ‘base plate only’ support only required for the mag adapter.
The mag is held by 3 neodymium magnets (9.6mm x 3mm disc) and a hatch, but fitting is tight enough to hold without magnets by the friction only. Center of mass of your replica will keep it stable in place.
Adapter mag is the same for both bases.
Thanks.