1 / 2
Lift Off Hinges for 2020 extrusion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quick hinge I made for use with 2020 extrusion.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 55
- Makes
- 0
- Views
- 299
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
A quick hinge I made for 2020 extrusion.
For each hinge you need:
1 - 40mm M3 socket head cap screw
1 - M3 nut
2 - M3 washers
4 - 12mm M3 socket head cap screws
4 - M3 T-nuts
Press the nut into the hexagonal opening in the smaller piece, then thread the 40mm screw through the same piece. Place the 2 washers on the 40mm screw, then place the larger printed part on the screw. Use the 12mm and the t-nuts to attach to the 2020 extrusion.