1 / 9
Dust filter with Teflon tube attachment.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dust filter with push fitting for 4 mm PTFE tube. Clips are required.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 35
- Makes
- 0
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After installing the BTT SVS V2.0 filament motion sensor, there were plastic clips left, I decided to use them for the filter attached to the tube.
Based on the model of the Haprog comrade. Two options, single and double sided. Printed PLA, 0.4 nozzle, 0.2 layer, 2 perimeters, 15% infill.
P.S. The filter with two fittings has a disadvantage - it is inconvenient to insert a filament. Improved model in the filter3.stl file