12 gauge Ammo Tray for Greenmade Store-All Storage Crate Sold by Costco
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.08 – €4.99 net (excluding VAT)
For file: Shotgun tray.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.53 excluding VAT (range midpoint).
- Weight reported by the author
- 47 g
- Print time reported by the author
- 5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Trays to maximize your 12 gauge shotshell storage in a Greenmade Store-All Storage Box
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 40
- Makes
- 0
- Views
- 663
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After buying these Greenmade ammo boxes at Costco, I noticed that they did not come with any trays. After a long web search, I was unable to find any shotgun shell trays that would fit Greenmade ammo boxes because the internal dimensions are smaller than other manufacturers.
To that end, I decided to design (Tinkercad) and print my own. To maximize the number of shells that could stand up in a Greenmade ammo box, I split the tray in half to fit the Ender 3 Pro bed (220 x 220 x 250 mm). Having separate halves makes it easier to hold with one hand while using the other hand to take out or put in the trays into the ammo box.
This tray is designed to hold 2 ¾" and 3” shotshells. I test-fitted using Boss 2 ¾” and 3” Winchester Black Cloud, Super X, 3” Herter’s, and 3” Federal Speed Shock. You should have no issues getting 2 layers (at 32 shells per layer) of any size shotshell, including 3" shells!
I've created print files using Overture PLA and uploaded the model and project files as well. You also do not need any supports! However, the trays do take some time to print. I tried to reduce that time by cutting down on layer size and width. Initially, I used a 2mm layer size, which was very detailed but took 15 hours to print one tray. I didn't need that much detail so I changed to a 4mm nozzle size, 45% density, and 55 print speed, and it took around 6 hours to print.
I hope this can be useful for any fellow shotgun owners out there.