[DEPRECATED] 'Nucleus & Hydrus' Brushed Foam Dart Blasters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Competition Optimized, 32.5mm or 40mm Brushed Motor Spacing, Simple Compact Foam Dart Blaster
- Rating
- 5 / 5
- Likes
- 107
- Downloads
- 338
- Makes
- 10
- Views
- 3,186
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
DEPRECATED, BUILD JPHAGE INSTEAD. V2 COMING SOON
Introducing the Nucleus, my take on a pistol size format CQB competition blaster. This blaster shares the same cage and BCAR setup as the Voidrunner, but uses the aesthetics and 4:1 geared trigger from the Protean. The battery is stored in the grip, and construction and wiring is very simple. Key components and features are as follows:
- 32.5mm Motor Spacing, with support for Roboman Automation's Machined Flycore Cage
- Hurricane, Pulsar, Banshee Junior, Or Turbo Ranger Mini Flywheels
- 4:1 Geared Trigger for rapid response time
- Support for Talon and Koda spec mags
- Easy FPS Adjustment with toolless BCAR swaps
- Easy toolless battery removal
Things You'll Need:
- 6mm, 8mm, 14mm, 16mm, & 25mm M3 Screws
- Omron 21A Microswitch (Button Or Lever)
- Trigger & Mag Release Springs
- Wire/Heatshrink
- Female XT60 Or XT30 Connector
- Heat Set Inserts (Files for BOTH McMaster (M3x6.4mm) and Voron (M3x4mm) Included)
- Up To 12 MF63ZZ Bearings For BCAR
- Up To 1000mah 2S Or 3S LiPo Battery (Approx ~65x40x35mm Compartment)
- Motors/Motor Mount Screws (I recommend Fang ReVampeds)
- Flywheels (I recommend Turbo Ranger Minis)
- OPTIONAL Roboman Automation Machined Flycore Cage
CHANGELOG:
12/15/24 (V1.1)
- Added more Mag Release styles
- Added more Trigger styles
- Added relief cuts in Grip Wrap to prevent part breakage upon installation
- Added Split Rail option for smaller print beds
- Edited Grip Frame and Grip Heel to remove nuisance screw/allow for toolless battery removal with thumbscrew
3/31/25 (V1.2)
- Fixed Magwell and Receiver Cover to prevent wheel rub on cage causing wheel walking
- Changed Pusher Cover and Geared Pusher to accommodate Gryphon pusher profile
- Changed Mag Release to match Gryphon mag release position
- Changed Grip Frame to constrain pusher more (not a necessary reprint for existing builds)
6/5/25 (V1.21)
- HOTFIX, Fixed incorrect Receiver Cover geometry that was causing mags to not catch.
7/20/25 (V1.3)
- Improved Grip Frame & Grip Wrap interface with Grip Wrap
- Adjusted Trigger Cover & Grip Frame to give more room for wires
- Adjusted Receiver Cover, Pusher Cover, & Split Rail to allow for slightly easier dissasembly
- Added “Hydrus” Front End parts to allow use of Manshee/Quickdraw combination to allow for 200FPS setups in this blaster
CREDITS:
This blaster contains influence from models/blasters made by Flygonial, Ray, Roboman Automation, & Chance Designs. Thank you to those creators for support in developing this blaster.
LICENSING INFORMATION:
If you wish to sell this blaster or kits for this blaster, please DM me on Discord at @foreohfour.