Bambu Labs Magnetic levitation kit alignment jig Demo Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bambu Labs Magnetic levitation kit alignment Demo Holder used to place the floating thing.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 197
- Makes
- 2
- Views
- 1,245
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Bambu Labs Magnetic levitation kit Demo Holder used to place the floating thing.
Unplug the power from the base, place the floating metal disc and LEDs inside the floater holder.
Place the centering jig on top of the base. Then place the center floater inside the hole on the base. The center floating should be floating. Plug the base in and the slide the centering jig to the sides to remove.
If you mess up the base unit overheats and shuts down, check the red is on otherwise wait until it cool and try again.
Print with support on the base.