1 / 7
DC-DC / StepDown Converter Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple mount/case for a DC-DC StepDown Converter that gives a little bit of protection. The converter has a size of…
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 81
- Makes
- 0
- Views
- 586
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
A simple mount/case for a DC-DC StepDown Converter that gives a little bit of protection. The converter has a size of 37,5mm x 60,6mm so the case is quite tight. You can use M3 bolts to secore the converter.
Print Settings
Printer:
CTC Twinmaker
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0,2
Infill:
25%
Notes:
4 solid top & bottom layers, 4 perimeter shells (at least 2), printed with German RepRap PETG at 245°C Nozzle and 75°C Heatbed temperature
Post-Printing
Category: Electronics