Flak Silly Shell Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shoot Silly Shells lever action style!
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 17
- Makes
- 1
- Views
- 623
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Shoot Silly Shells lever action style!
I'm surprised someone didn't make this sooner, it seems like such a perfect fit! I guess the FLAK wasn't as popular as other CS blasters, given the lack of hardware its :p
I'm not too experienced with cad so this is pretty messy, but it mostly works! Main issue is the inconsistent shell ejection.
I made the shell rest by mashing all the trilogy hooks together and adding a ring around them, then made the shell rest by conjoining the T claws with the extractor from Silly's Battleaxe. Then the cart itself I just cut a roughly silly shell-sized hole into. I also had to cut the muzzle in half so that the cart could extend properly with the shell rest.
If you go to print this just print everything for the FLAK T normally, except for my parts, ofc. Should be pretty straight forward.
As mentioned the shell ejection is inconsistent at best, though it seems to work well when you prime the lever with the muzzle pointed towards the ceiling. There may be seal issues as well, but most ammo shoots well enough.