Buddy3D Cameramount XL
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.03 – €2.48 net (excluding VAT)
For file: Buddy3D Magnethalter_0.4n_0.2mm_PETG_XL_2h10m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.25 excluding VAT (range midpoint).
- Weight reported by the author
- 32 g
- Print time reported by the author
- 2.17 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Magnetic Cameramount for the XL Frame with height lock and camera lock
- Rating
- 4.5 / 5
- Likes
- 30
- Downloads
- 86
- Makes
- 5
- Views
- 949
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Holder
After printing remove the support, melt in the threaded inserts M3 (2 pcs.) and press in the magnets Ø6x3 (8 pcs.). The height stop is bent 90° and snaps into place (see picture)
Camera mount
Remove the support, drill out the holes if necessary; in my case they have become a little too small.
Connect both parts with M3 screws (2 pcs.) (M3x10 to M3x20 possible).
Magnets Ø6 x 3mm https://www.amazon.de/gp/product/B08F745KY5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
PS: Many thanks to Surfalex2000 for providing the model data of the camera! :-)