1 / 4
Cabinet Corner to fix a wooden plate on top of a cabinet with screws.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use 4 of these Cabinet Corners to fix the position of a separate plate on top of a cabinet so that it does not slide of.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- GNU General Public License v2.0
Use four of these Cabinet Corners to fix the position of a separate plate on top of a cabinet so that it does not slide of. The cabinet itself is not damaged as this fix is external to it.
Inner legs: 70 mm.
Outer legs: 85 mm.
Height: 15 mm.
Hole diameter: 10.5 mm.
Hole depth: 12 mm.
Hole diameter: 6 mm.
Hole depth: 3 mm.
Printing
Fill density: 25%.
Fill pattern: Grid or Gyroid.
Filament type: PETG or PLA will do just fine.
Note: be careful to not damage the outer layers of the print when fastening the screws.