Apollo AIR-1 frame
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.67 – €2.04 net (excluding VAT)
For file: AIR-1 frame_0.2mm_PETG_MK3S_2h13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.86 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 2.21 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Apollo AIR-1 frame to mount under a bookshelf. AIR-1 rest in the frame can be taken out for maintenance any time.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 1
- Views
- 208
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
A simple frame which hold the Apollo AIR-1 unit. You easy can put it there and take it out any time. Easy for maintenance. Easly fits the 62x62x32mm AIR-1 box.
Easy print, supports are needed. In my case I use PETG Prusament Mango Yellow.
Mounting holes are for 3mm screws
gd lck.