1 / 1
Christmas Tree Spinner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Christmas Tree whirligig
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 68
- Makes
- 0
- Views
- 528
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution
Modern Christmas Outdoor decoration. The model is 235 mm tall and 120mm wide. I also included files for printing the finial and mount separate colors, you can simply glue the finial into the top of the tree.
The model is designed to spin around 2 608RS Skateboard bearings and mount with an M4 bolt.
I attached mine to the top of my mailbox.
Required Parts
- (2) 608RS Skateboard Bearings
- (1) M6 Bolt 30mm to 50mm
Printing Instructions
- Print (supports required)
- Christmas Tree Spinner
- Finial
- Print (no supports needed)
- Bearing Spacer
- Outer - Bearing Sleeve
- Inner-Bearing Holder
- Outer-Bearing Holder
- Mirror and print the
- Inner-Bearing Holder
- Outer-Bearing Holder
Assembly Instructions
- Finial Assembly
- Glue the Finial to the top of the Christmas Tree Spinner
- Bearings, Bolt and Bearing Spacer Assembly
- Slide the first 608RS bearing onto the short end of the Bearing Spacer
- Thread the M6 bolt wit the head into the short end of the Bearing Spacer
- Add the second 608RS bearing on the long end of the Bearing Spacer
- Inner-Bearing Holder Assembly
- Place the Inner-Bearing Holder and the mirrored Inner-Bearing Holder around the Bearings, Bolt and Bearing Spacer Assembly.
- The thick portion of the Inner-Bearing Holder should be between the two bearings
- The Two Key Tabs should be on the same side
- The short end bearing and bolt head should be completely exposed
- Outer-Bearing Holder Assembly
- Place the Outer-Bearing Holder and the mirrored Outer-Bearing Holder around the Inner-Bearing Holder Assembly
- The open end of the Outer-Bearing Holder will be on the thin side of the Inner-Bearing Holder Assembly, and the bearing that was exposed in the Inner-Bearing Holder Assembly will covered.
- The two tabs should be on the same side
- The Inner-Bearing Holder Assembly tabs will slide into the Outer-Bearing Holder Assembly slots
- Outer - Bearing Sleeve Assembly
- Slide the Outer - Bearing Sleeve over the Outer-Bearing Holder Assembly using the Outer-Bearing Holder slots as a guide
- Christmas Tree Spinner Assembly
- Slide the Outer - Bearing Sleeve Assembly into the base of the Christmas Tree Spinner using the Outer-Bearing Holder slots as a guide
- Snug the Outer - Bearing Sleeve Assembly to the base of the Christmas Tree Spinner
Optionally - Glue the Outer - Bearing Sleeve Assembly to the base of the Christmas Tree Spinner