1 / 2
Pet Bottle Bidet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It‘s a bidet to screw on a standard euro pet bottle (thin type / PCO1881 / 2.7mm thread pitch).
It irrigates things.
The screw top seals very nicely without an o-ring.
Print with a brim with the thread facing upwards in PETG or ASA without supports.
Using random seam position is recommended to improve the seal and prevent leaking.
Change Log:
V2: Improved printability
Will fit: euro pet bottle (thin type / PCO1881 / 2.7mm thread pitch)
Will NOT fit: smartwater bottle (PCO1810 / 3.18mm thread pitch)