1 / 7
Smaller print-in-place kaleidocycle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to print one, but 5 hours printing time was too much... ... Scaling down obviously messed with tolerances and…
- Rating
- 4.6 / 5
- Likes
- 32
- Downloads
- 242
- Makes
- 9
- Views
- 745
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I wanted to print one, but 5 hours printing time was too much...
... Scaling down obviously messed with tolerances and clearances.
=> redisinged and remixed it from scratch with 5 to 6cm diameter, resulting in about 2h printing time.
Worked right away; clearance being 0.3mm
Uploaded new stl "nano":
Increased strength, even smaller, clearance to 0.3mm in really every spot.
Print Settings
Printer Brand:
Anet
Printer:
A8
No
Supports:
No
0.2
Infill:
30
Filament:
None PETG Transparent red
Category: DIY