Intex bend pool outlet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've seen a couple of bend outlets - but none was just like I wanted it to be... So: calipers out and on to CAD: The…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 56
- Makes
- 0
- Views
- 1,110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I've seen a couple of bend outlets - but none was just like I wanted it to be...
So: calipers out and on to CAD:
The nozzle can be pushed through the screw cap from behind;
It is good by 2 screws M4x12 (Inox...) Which thread directly into the flange of the nozzle.
The screw cap has wide holes which allow the nozzle to be turned about 135° and it can be clamped by the screws.
... All that screws onto the outlet in the wall of the pool. The nozzle fits over the inner part.
Can be fine tuned for optimal water flow in the pool;-)
Print Settings
Printer Brand:
Anet
Printer:
A8
No
Supports:
No
0.24
Infill:
20
Filament:
Das filament PETG Red
Category: Replacement Parts