Compact Fillament Shelf
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Compact, easy to print and not a centimeter bigger than it needs to be!
the shelf braces are mounted with two screws each and designed to accept a 20mm pole as the “shelving surface". The pole should be a press fit, but there are screw holes in case you need to secure it further. I used a length of pvc pipe for mine and determined that a distance of four fillament boxes between each brace was as far as i could go without bending the pipe too much, but you may be able to get away with fewer braces if you are using a different kind of pole or have lower safety standards.
So far I have only used the shelf in a hanging configuration, but mounting it “upside down” should also be fine, as long as your screws and wall can take it.