Functional one way clutch model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by a video from Maker's Muse I've seen on YouTube, I wanted to see how small I could take it to get a…
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 236
- Makes
- 3
- Views
- 1,441
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Inspired by a video from Maker's Muse I've seen on YouTube, I wanted to see how small I could take it to get a functional model from my "not that exact" Anet A8.
This is what I came up with, designed from scratch:
About 32mm in diameter and 6mm high.
Easy print in place in less than 30 minutes.
Needed some braking free, but works smoothly - running one way, blocking the other.
Braking free can be supported by a hex key in the middle hole.
Full credit for idea goes to Maker's Muse, here the slightly altered link to their video (altered because it does not look right to have their video as thumbnail on my minimized version which thingiverse would insert automatically...)
https: //youtu.be/UIhCPl8eb7s
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
26
Filament:
None PLA Blue
Category: DIY