Pen lifter for CNC Plotter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is the front part of the CNC pen plotter shown in the pictures.
Please refer to the YouTube video for seeing the design in action.
It uses a 9g Servo to move a pen up and down.
Pen is fixed with two cable ties.
In the middle I used aluminium tubing (OD 6mm, ID 4mm).
All the parts are aligned with one piece M3 threaded rod, components hold on positions with a couple of M3 nuts. The spring keeps the pen pushed to the paper in idle mode.
Attachment of Servo and of the assembly itself to the CNC plotter is done with some hot glue.
Designed in Onshape;
public link to CAD - source files attached:
https://cad.onshape.com/document-redirect.html?d=/documents/9158d083cabd84b78d2e0afb/w/46fec7ef818f30d1c785996b
See fully assembled CNC - Plotter in action:
Goes together with this design:
https://www.thingiverse.com/thing:2746214
Print Settings
Printer:
Anet A8
Rafts:
No
No
Resolution:
0.2
26
Category: DIY