2-in-1 Dust Adapter for Makita LS1017L / LS1018L Miter Saws
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2-in-1 Dust Adapter for Makita LS1017L / LS1018L Miter Saws
- Rating
- 0 / 5
- Likes
- 0
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Standard Digital File License
2-in-1 Dust Adapter for Makita LS1017L / LS1018L Miter Saws
This dust adapter is specially designed for Makita LS1017L and LS1018L miter saws.
It allows you to use either the original Makita dust bag or a 100 mm diameter hose connected to a dust extraction system.
With its 2-in-1 design, you can switch between dust collection modes instantly, without any tools. A simple and effective way to keep your workspace clean and your saw performing at its best.
Printing tips:
Recommended materials: PETG or ABS (for strength and durability)
No supports required
Can be printed with a 0.4 mm or 0.6 mm nozzle2-in-1 Dust Adapter for Makita LS1017L / LS1018L Miter Saws
This dust adapter is specially designed for Makita LS1017L and LS1018L miter saws.
It allows you to use either the original Makita dust bag or a 100 mm diameter hose connected to a dust extraction system.
With its 2-in-1 design, you can switch between dust collection modes instantly, without any tools. A simple and effective way to keep your workspace clean and your saw performing at its best.
Printing tips:
Recommended materials: PETG or ABS (for strength and durability)
No supports required
Can be printed with a 0.4 mm or 0.6 mm nozzle
------------------------------------------------------------------------------------
Raccord poussière 2-en-1 pour scies radiales Makita LS1017L / LS1018L
Ce raccord poussière est spécialement conçu pour les scies radiales Makita LS1017L et LS1018L.
Il permet d’utiliser soit le sac à poussière d’origine Makita, soit un tuyau d’aspiration de 100 mm de diamètre relié à une centrale d’aspiration.
Grâce à son design 2-en-1, le passage d’un mode de captation à l’autre se fait en un instant, sans outil. Une solution simple et efficace pour garder votre espace de travail propre et votre machine performante.
Conseils d’impression :
Matériaux recommandés : PETG ou ABS (bonne résistance et durabilité)
Aucun support requis
Impression possible avec une buse de 0,4 mm ou 0,6 mm