Gridfinity Bambu Lab X1c Wiper & Cutter - Internal Magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bambu Lab X1c Wiper & Cutter Gridfinity holder - Internal Magnets
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 1 x 1 gridfinity bin that has slots to hold 3 bambu lab X1c wipers and 5 cutters.
It has internal magnets inside.
Printing Instructions
Print in low infill (5-15%) and high layer height (0.2-0.32mm).
Internal magnets
To get the magnets inside of the internal magnets print, either pause the print when the walls of the magnets holes are a a sufficient height so the extruder won't collide with them and place 4x 6x2 or 6x3 magnets in the holes. (A dot of CA glue in each hole can prevent them from rattling).
Alternatively, in the slicer you can add a pause at a chosen layer. To do this slice your model and drag the layer slider to the layer which is just above the magnet holes. Next right click the ‘+’ icon next to the layer slider and select ‘Add pause print)’. During the print when it gets to the selected layer it will dock the hotend. Place the magnets in their holes making sure the polarity is compatible with your other bins. A drop of CA glue can prevent magnets from rattling. Press ‘resume’ on the printer and it will continue.