1 / 6
Flush Drawer Pull
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
Drawer Pull designed to install into 2.5" hole into 3/4" plywood. Route the back side of the drawer front down the thickness of the rear handle pull part so that it will be flush with the surface and install onto the drawer without interference.
I'm using these drawer pulls on my miter saw station in my workshop.
I suggest installing the drawer pull with silicone to keep it from rotating within the drilled hole.
Fusion 360 file included if you want to change the hole size or plywood thickness.