Fisher-Price SpaceSaver Cup Holder Adapter for NUK Fun Grips Cups
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model allows you to fit NUK Fun Grips cups (from Walmart) in the Fisher-Price SpaceSaver tray cupholder.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
My kids have started to outgrow their things, and one of those things is the rather small (~74mm diameter) cup holder on the tray of a Fisher-Price SpaceSaver High Chair. The NUK Fun Grips cups we use are about 80mm or so in diameter, so they don't fit, tip over, and generally make mealtime harder for our kiddo than necessary. Rather than go find another solution, I just designed this adapter to provide a sturdy and stable adapter from the 74mm to about 90mm to allow for some play (~5mm on each side) when inserting/removing the cup.
This adapter prints in two pieces, the main adapter and the inner adapter. There are a few reasons I went this direction.
- I used PETG so it could withstand the inevitable wetness, messiness, and cleaning process of being used by toddlers.
- When trying to print as one piece, the middle requires supports, and it's just a bunch of wasted material. By splitting it into two, I was able to go down from 120g of filament to 90g of filament. Nice.
- I didn't waste time making it chamfered or smooth or anything like that, it's just a cupholder, so there are 90º angles inside the cupholder area. Scrubbing those in a small space can be a pain, solved by allowing it to come apart.
- You can print in two different colors! Ayyyy.
Main Adapter Print Settings:
- Supports: Tree
- Orientation: -90º (74mm bottom / 90mm top)
- Infill: Gyroid 15%
- Material: Elegoo Rapid PETG - Clear (any PETG will do, though)
- Walls: 4 (for a little extra strength, ya know, toddlers)
Inner Adapter Print Settings:
- Supports: None
- Orientation: 90º (74mm top / 90mm bottom)
- Infill: Gyroid 15%
- Material: Elegoo Rapid PETG - Clear (again, any PETG will do)
- Walls: 4 (again, el toddlerino)