1 / 2
Threaded Insert Backplate for: Wallie(var) - Advanced Lever Action Wallet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified version of the Advanced Wallie backplate that has enlarged holes for threaded inserts
- Rating
- 0 / 5
- Likes
- 61
- Downloads
- 196
- Makes
- 1
- Views
- 1,622
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After some of the screws coming lose with heavy repeated use, I wanted to try threaded inserts in the backplate to hopefully make it a bit more robust. I found this really helps the tension screw and allows you to add more tension then just screwing into the plastic.
Do note this is only for the fully skeletonized bottom. Its also slightly thicker to allow for the length of the inserts.
You will need the following parts in addition to the standard hardware:
- 5x M3x3x5 (Thread x Length x Diameter) Inserts. There were a bit harder to find but I got from https://www.amazon.com/dp/B0CRPDNGDD
- 1x M4x6x6 Inserts (slightly different lengths would also probably work but thats what I used)