Flow calibration
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple and fast test for trimming the flow on your printer. Works for single- and multi-perimeter walls.
- Rating
- 4 / 5
- Likes
- 13
- Downloads
- 208
- Makes
- 1
- Views
- 1,122
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial
A simple and fast test for checking your printers flow.
It is only 5mm tall, which makes for a very fast print.
The model can be used for single or multiperimeter wall tests (set in the slicer).
Print using 0% infill, no top and bottom. Also add a brim for stability.
Set perimeter count to 1 (or more if testing on thicker walls).
Measure the thickness at the center of each wall. Only measure the top 1 or 2mm to avoid measurement inconsistencies.
The corners have been rounded, to minimize potential ringing.
Happy printing :-)