Deco Lamp G9 Bulb 3W 220V
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a table lamp designed for a G9 Bulb and G9 Bulb Holder with tree and leaves white side panels
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 18
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
The base doesn't need supports, the top lid does, but they are minor and come out very easily.
Assemble the G9 screw-base holder with some glue to the base using the pre-designed anchoring guides, pass the wiring through the hole in the base and pull it through the middle G9 screw-base holder (now you can plug the wires into the G9 Bulb Holder) This order is important if you're using a pre-wired plug with an on/off switch.
Once this is done, screw the bulb holder to the screw-base making sure the wiring freely turns through the pass-through hole in the base…once this step is done, add some glue to the base hole to prevent any occasional cable pulling.
Plug the G9 bulb (test it before placing the lid as Led bulbs have polarity) and place the top lid with a small drop of hot glue, and you're done.
Enjoy it !!!