1 / 5
Measuring Tape Winder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Winder to hold a 14 or 20 mm wide measuring tape. Looks like the little elefant from Die Sendung mit der Maus.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 55
- Makes
- 0
- Views
- 244
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A winder to hold a 14 or 20 mm wide measuring tape. Looks like the little Elefant from Die Sendung mit der Maus.
I printed it with PETG and PLA. Both works.
0.2mm layer height
To insert the tape:
- Lay the tape in the trunk with the metal ending in the round chamber
- Use needle nose pliers to push the metal ending through the centre pin on the side where the pin has only one slot
- Use the needle nose pliers to insert the metal ending into the slot that does not go all the way through the centre pin
- Press the top part onto the bottom part.
Changelog:
11.12.2024 Release