1 / 3
3D Stinky Tofu
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is one of my 3d printed version of the Original Stinky Tofu
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 34
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
I have provided stl and 3mf files for people who want to try.
All used 0.2mm resolution to print.
Printing notes:
- Please print the cup facing down to avoid bad bearing seat printing
- Support is needed, tree or normal are all fine.
- Print it solid (100% infill or bottom layer 99999)
- Shell wall layer recommend 3 or 4
The yoyo requires:
- Body x2 (PLA)
- Shaft x1 (PLA, PETG is recommended)
Other requirements:
- m4 16mm hex screw x1
- m4 nut x1
- C bearing x1 (Recommend to take the shields off)
- 19mm Pads x2
Installation steps:
- Put the shaft into one of the yoyo body
- Insert the screw from the cup
- Insert the bearing onto the sgaft
- Insert nut on the other body cup
- Screw together(do not over screw!)
- Done!