Kodama Clock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Another clock based on the Studio Ghibli characters named Kodama. This was hand drawn in Fusion 360 because existing images would not fit the dimensions appropriately. The inset for the clock mechanism is 56mm x 56mm. This wasn’t done to fit the majority of clock bodies, it was done to fit the existing clock mechanism I salvaged out of a junk clock. If there is sufficient demand, I can flush out the inset so that any clock body can be used. The stem length will have to meet the depth of the cock body (15mm).
This is printed on an X1C, face down. This could be printed with a single spool printer using pauses and spool swaps on the first layer. I’d recommend printing this face down for best quality. The pattern seen on the surface is due to the build plate.