1 / 5
Samyang/Rokinon 135mm lens hood filter holder for Kase 100mm filters — image 1
1 / 5

Samyang/Rokinon 135mm lens hood filter holder for Kase 100mm filters

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

For when you need to use a samyang/rokinon 135mm f2 lens with both the lens hood AND a 100mm filter at the same time.

Rating
0 / 5
Likes
4
Downloads
27
Makes
0
Views
241
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I don't usually need to use the kase filter holder at the same time as the lens hood on my lenses.

But - I use the Samyang (or Rokinon - seems to be the same lens) 135mm f2 lens for astrophotography - and in certain situations I am dealing both with stray light which needs the lens hood AND with light pollution - where I sometimes want to use a Kase 100x100 filter (neutral night filter or bahtinov mask filter).

This print provides a (tight) push fit filter holder that just presses on to the front edge of the lens hood.

The filter holder sides are simply glued in place - rather than being a single model - this makes for a faster print that doesn't need supports.

Place the lens hood mount face down on the build plate.
Place the filter holder edges on their back (you need 2) - with the three strips facing up.

When gluing - the slight curves on the filter holder edges should be on the camera  side of the lens hood mount and should align with it (basically just centered on two opposite edges.

Tags