Parametric Sticky Note holder and stencil
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A customizable holder and stencil model for ubiquitous sticky note blocks
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 53
- Makes
- 0
- Views
- 683
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
I wanted a neat, sturdy holder for sticky notes; and whilst looking online for ideas on model, I stumbled upon the concept of having a stencil integrated. I implemented this as having slots on the sides of the holder, allowing a lid to be easily placed; they are designed as such that the lid has to be in a vertical position for it to be removable
The pre-generated models are designed for this particular type of sticky notes: https://www.clasohlson.com/fi/Muistilappukuutio-viivoitetut-arkit-101-x-101-mm/p/44-2292 - however, adapting these should prove relatively easy with the included OpenSCAD file. Note that you require Belfry OpenSCAD Library for generation to succeed.
Printing instructions
A sturdy material and reinforcing printing settings are recommended, considering this is a functional print expected to be handled somewhat roughly. Example was printed with Prusament PETG; 4 perimeters, variable layer height (max 0.3) and 30% infill for the base. The lid was a more experimental one, with no top or bottom solid layers, 80% infill in picture (lesser should work, e.g. 60%), and minimum of 3 perimeters.