1 / 1
Slotcar Crowngear
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The crowngear from an old slotcar's axle was down, so i tried to fix it with a 3d-Remake.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 44
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
Which Slotcar-Set: Dickie Racing-Set 8 (Art.-Nr. 203) from the 1980s.
The motor pinion of this slotcar was from brass what has caused a major loss on the plastic gear's teeth. Because the crowngear is aligned to the outside, there was no chance to use a recent common gear.
- The axles diameter is 2.1 mm
- the gear has 18 teeth (about 1 mm in height and width)
I printed in PLA with 0.07 Ultradetail. Depending on durbility i'll try it in ASA and PC.