WBH - Waste Bag Holder for Festool MFT 3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stable, efficient, and adaptable parametric design—perfect for keeping your workspace clean and organized
- Rating
- 5 / 5
- Likes
- 248
- Downloads
- 447
- Makes
- 5
- Views
- 3,450
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is modelled for the Festool MFT/3 contest and a re-desing of a circular waste bag holder that I published a month ago. I think the rectangular shape better suits the application at the workbench.

My design consist of five parts, the frame and a ring to hold a waste bag, two brackets to mount the frame to the Festool MFT 3 and an optional bridge piece to eliminate the gap between the waste bag holder and the surface of the table.
Overall dimensions
I prepared three base versions of this model. One for small, medium and large printers, find them in the download section, labelled accordingly. I designed the frame to a be a wide rectangle rather than circular or square because for most applications one bigger axis will suffice to get stuff into the waste bag. The further the structure extents from the mounting brackets the bigger the lever and thus greater that force that may rip off the frame. The ratio from one side to the other is derived from the golden ration to achieve an aesthetic overall appearance.
Bridge the Gap
Pushing saw dust or other debris into the trash bag required some sort of filler between the mounting position of the bag holder and the wooden table surface. This is especially useful in combination with hole plugs like these by EchoDeltaMike.
Consistent Wall Thickness
All vertical walls in this model are generated using either the wallThickness parameter, twt2 ( 0.86 mm ), twt4 ( 1.67 mm ), twt6 ( 2.49 mm ) or twt8 ( 3.30 mm ). twt stands for Thin Wall Thickness, it's a value calculated by PrusaSlicer for a given line width and layer height combination. You can find these values in the Vertical shells section in the Print Settings tab. I'm not sure if those are still relevant with Arachne as an perimeter generator, with Classical sticking to these values is mandatory.
Using Shell/Thicken features in Fusion 360, that generate sloped surfaces like chamfers or other overhangs, lead to a line-width inconsistency that was addressed where necessary: - wallThickness * ( 1 - sin(printableOverhang) )

Split Dovetail Brackets
Due to the width of the frame and the fact, that the frame connectors double as mounting brackets on the aluminium rails of the MFT 3 I had to change the print orientation from what I used with the previous WBH.

Printing the brackets sideways gives optimal strength in direction of the main load. To keep the parts printable I split them in half and kept only one side angled. This aligns the dovetail with the weaker horizontal plane. When using a material with strong layer bonding this should ne be a problem considering the ratio between leverage and surface area.

Alternative Mounting Options
With the most recent update to this model I changed the backside of the frame to make it possible to hang it on an alternative mounting bracket. Attach it with adhesives (3M VHB or Tesa PowerStrips) or screws. If you need to change the screw style or position or want to adapt to another system, you can find the STEP files for the bracket in the download section.

Print Instructions
The provided STL files are optimized for a 0.4 mm nozzle, all walls are designed to be 0.86 mm in thickness (as recommended in the PrusaSlicer for two perimeters). If you plan on printing this model with thicker walls, I recommend adjusting the wallThickness parameter in the Fusion 360 file.

Material-wise PETG, PLA, ABS/ASA will all work fine. PETG and ASA will of course be more durable.
The STL files are all already oriented as intended.
Customization
Parameter names starting with _ are model-internal calculations and are there for documentation purposed, don't change these. All other parameters can be modified.
I tried my best, but for some reason Fusion 360 is hesitant to keep track of some of the faces, that change when altering the width parameter. This affects the two Surface Loft Features in the middle of the timeline. When changing parameters you will most likely need to update the feature and restore the faces, as well as the following Seam and Loft operations.
To fix the Loft features, open it for editing and Ctrl + Click the upper inner edge of the chamfer. Make sure, that you select from the surface body (yellow) and not the solid (grey). To make this easier, hide the solid in the Browser (Frame - Bodies - Body460). Ctrl + Click will add the edge to the existing profile (Profile 2). Do the same for the Loft feature on the other side.

Last but not least, fix the Stich feature with Ctrl + Click, adding all the loft bodies.

When you have a hard time figuring out what a feature in the timeline was supposed to do after a parameter change dropped a whole lot of references, simply open a second instance of Fusion 360 with the original and unchanged file, as a reference.