West Biking folding bike lock covers
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.37 – €0.45 net (excluding VAT)
For file: WB cover_0.4n_0.2mm_PETG_MINIIS_23m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.41 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 23.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Masking covers on lock plates and rivets.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Covers hide holes, rivets and the real thickness of the plate.
Designed for six section lock, length 80cm, weigh about 500 grams.
Covers attach with CA glue.
3 different models:
Side cover (print 12 pieces)
Small rivet (print 5 pieces)
Big rivet (print 5 pieces)
Print settings:
Nozzle: 0.4mm
Material: PETG
Perimeters: 2
Infill: none (automatically full)
Supports, brim: no