1 / 5
Raspberry Pi 5 case with thick thermal and 4010 fan
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought some thick(12mm height)thermal from mcuzone,and seems most case model won't fit,so I designed this one with below features.
- Support thick (12mm) thermal.
- 4010 PWM fan
- TF Card Exposed
- Power Button Exposed
- GPIO Pinout Exposed
Use 4x2.5x3x3.5 heat set inserts on the lid part.
Use 4x2.5*8 countersink screws on the case bottom.