Schalterauslöser / Switch Trigger Makita DMP181Z / 180Z
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.42 – €0.51 net (excluding VAT)
For file: DMP181_Switch_Lock_v2_0.4n_0.15struct_Rand_60%_PETG_MK4SMMU3_31m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.46 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 31.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Switch Trigger, Schaltersperre für Makita DMP 180/181Z
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 211
- Makes
- 1
- Views
- 534
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ich fand das tolle Design von FrankBer sehr nützlich und habe es an meinem neuen Kompressor DMP181Z getestet.
Auch an diesem Gerät funktioniert es einwandfrei. Ich habe das Design ohne Schlauchschelle modifiziert, da am DMP181Z bereits drei entsprechende Halterungen vorhanden sind.
Gedruckt mit Prusa PETG, 60% Füllung, mit Rand.
So ist es recht flexibel und kann am Gerät verbleiben.